What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 28.06.2025 00:21

A circuit breaker is similar, but is resettable.
So, the voltage could go up to 500 volts, and the fuse will not open up.
2024–10–16 [ OO OLAOYE OYEBODE ]
Kate Middleton shares heartfelt message after unexpectedly pulling out of Royal Ascot - Page Six
This is the picture of an electronic coil of wire wound around a core of magnetic material.
The third is lightning and “how it gets conducted into a home.”
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
(Dc diagram shown, AC is similar).
This is where this question deviates from being a 'generic' question, and becomes more specific.
These are simplified answers to the original question, and does not change anything I wrote above.
Satellite Images Suggest US Avoided Iran’s Nuclear Reactors - Bloomberg.com
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
nine
In schematic diagrams this is the symbol for a fuse:
Upvotes:
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
but I think this circuit , shows a few more pieces.
It seems Mohan does not understand the difference between a comment and an Answer.
At least they know the answer if they wanted it.
This is where the MOV conducts again, and dissipated the energy.
Supplement health risks to know about, plus a celebrity's 'brutal' infection - Fox News
But… the neutral is now “floating” because of the 1 ohm resistance.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
One is “what exactly is in a ‘surge protector’ ? ”
The bolt then partially travels down the line to your home.
Edit 2024–10.
Feather-legged lace weaver spider kills prey by covering it with toxic silk - Phys.org
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Where to Watch Le Mans Live Stream 24-Hour Race Online for Free From Anywhere - Business Insider
One
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
At one ohm, the resistor has a maximum of 1 watt power.
2025 Audi Q5 And SQ5 Are Pretty, Pretty Good - Jalopnik
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
I post the exact comment here.
‘Smash’ abruptly announces final show after Tony Awards drama in Broadway shocker - New York Post
An AC voltage/ current source, and an ac inductive load.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
what exactly is a ‘surge’ protector?
Has Messi scored against the Buffon?
What is lightning?
Can the fuse protect the electronic devices from lightning instead of a surge protector.
[old diagram got deleted by accident]
He then asserts :
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
the problem then depends on "how fast does the fuse operate?".
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
It also is a device that limits the change in current flow.
But it can get overloaded, and no longer works.
[image of Common-mode choke]
2024–10–14 [Omar Gharbi Omar Gharbi ]
First Sentence:
There are three different concepts here that are getting confused.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
He then describes the function of a fuse.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
These devices are installed between the “hot” and “neutral” and protective ground.
This one hit behind the barn.
Here is a simplified AC power diagram.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Barnstars:
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
The other is “what does a “fuse” do?”
The MOV will conduct when the voltage exceeds 50% of line voltage.
For this case there are devices called Metal oxide varistors (MOV).
so, what happens?
eight
A fuse is a non-resetable over current circuit protector.
He then describes Rainy Season and Lightning.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Now when you have a certain ac resistance, then a current flows in a loop.
Because the load is inductive, the current lags the voltage.(by a bit).
This device then solves the entire problem.
2024–10–10[John johnson John Johnson ]
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
There are two important concepts here.
but this device (an Inductor) … impedes the rapid changes in the current.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
What does a fuse do?
a photo is worth a thousand words.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This is 'the assistant's answer'